Shop

To order items simply click on the ‘Add to Basket’ button, on completion scroll to the bottom of the table and click on the ‘Begin Checkout’ button.

Please note the paragraph below the table relating to ordering by more conventional means i.e. snail mail or by email me or where the options below don’t fit your requirements.

The following notes apply to overseas customers:-

1. In view of a number of non-deliveries of recent customer orders we are offering an 'Internationally Signed For' option which will cost an extra £3.50 per order. This will provide both a tracking service and increased insurance cover.

All overseas customers are strongly urged to take this option to help ensure delivery of their package, we are UNABLE to guarantee delivery otherwise.

2. consider ordering the built devices without the cast brass battery terminals, this would offer a saving in total of some £4.50-6.00 ($7.50-10).

3. remember to check the postal supplements beneath each section and add to the order as required

4. payments can be made using the MoneyGram or Western Union system for those customers outside the PayPal system or you can make a payment direct to our bank account - BIC: ALEIGB22 IBAN: GB44 ALEI 7200 0003 3834 07 Account Name - Courtiestown Marine Ltd, Alliance & Leicester Commercial Bank. Please note international payments should be made in GBP, will incur a £10 surcharge on the order & will take upto 7 working days to complete.

PV Solar Products
One pair of Multi-Contact MC4 PV panel Connectors - £4.25 + £1.00 P&P.
10 prs of Multi-Contact MC4 PV panel Connectors - £41.50 + £2.50 P&P.
1pr of Multi-Contact branch connectors (Pt. No. 32.0018 & 32.0019) - £17.50 + £1.50 P&P.
10mtrs of Multi-Contact 4mm2 double insulated PV cable - £10.00 + £3.50 P&P.
1off Kraus & Naimer PV DC Disconnect isolator switch (KG20 T104/D-P003 KL51V rated at 500V/12A which is more than adequate for upto a 2.5kW PV system) - £42.00 + £5.00 P&P.
EDTA
Sufficient to treat one 'normal' sized battery - £2.25 including P&P.
Basic Kits, built boards and fully boxed pulser units - c/w reverse polarity protection
Bare Pulser PCB only (UK/ EC) - £3.00 + £1.00 P&P.
12V Basic Pulser PCB Kit (UK/ EC) - £14.00 + £2.50 P&P.
24V Basic Pulser PCB Kit (UK/ EC) - £15.00 + £2.50 P&P.
12V 'High Power' Pulser PCB Kit (UK/ EC) - £18.50 + £2.50 P&P.
24V 'High Power' Pulser PCB Kit (UK/ EC) - £20.00 + £2.50 P&P.
PIC Pulser PCB Kit (UK/ EC) - £25.00 + £2.50 P&P.
'Stripped Down' PIC Pulser PCB Kit (PCB, PIC and inductors only)(UK/ EC) - £18.95 + £2.50 P&P.
Supplement for building/ and testing any of the above kits (except the PIC). Thus you are supplied with a bare working pulser PCB to put in a case of your choosing. Price £10.
Supplement for building/ and testing the PIC kit above. Thus you are supplied with a bare working pulser PCB to put in a case of your choosing. Price £15.
Supplement for completely assembling the above kits (except the PIC device) into a boxed working unit. Thus you are supplied with a complete unit supplied with bare 8.4mm (5/16") ring terminals. If you require cast brass battery terminals or crocodile clips select these options below. Price £16 + £1.50 P&P.
Supplement for completely assembling the above PIC kit only into a boxed working unit. Thus you are supplied with a complete unit supplied with bare 8.4mm (5/16") ring terminals. If you require cast brass battery terminals or crocodile clips select these options below. Price £24 + £0.50 P&P.
Cast battery terminal clamp option - £4.25
Crocodile Clip Option - £4.00
PIC Special Offer
One PIC pulser kit + two Basic Pulser Kits (UK/ EC) - £47 + £3.50 P&P.
Kit/ Fully built board and fully built unit Postal Supplements
Kit or fully built board postage supplement for US and Rest of World destinations - £1.00.
Fully built unit postage supplement for EC destinations - £2.00.
Fully built unit postage supplement for US and Rest of World destinations - £6.00.
'Internationally Signed For' option, offers a measure of tracking and increased guarantee of delivery - £3.70.
Leads
'Monster' leads (7mm2) c/w soldered ring terminals (UK/ EC) - £2.00 + £1.00 P&P.
Basic multi-meter for use with pulsers above
A low cost, general purpose digital meter (as per photo on Pulser page) with 17 ranges, you can use it elsewhere when not monitoring your batteries! (UK) - £3.50 + £1.00 P&P. (when ordered with a pulser)
Frequency Counter Meter
A low cost, general purpose PIC based frequency counter kit capable of measuring/ auto-ranging upto 50MHz. Price TBA but expected to be circa £25 + £2.00 P&P.
A box to fit the above kit. Price TBA but expected to be circa £4.50 + £1.00 P&P.
A ready built and tested unit. Price TBA but expected to be circa £45 + £2.50 P&P.
Bob Boyce Electrolyser
PWM3G PCB (originally supplied by Hydrogen Garage and offered here to save you being hit for import duty one-off charges). This uses the IRF540 MOSFET. Price £17 + £1 P&P.
PWM3G Kit including PCB and all electronic parts (14 in stock). Price £53.50 + £2 P&P (UK & EEC). Rest of the World customers please add £0.50 postal option below.
PWM3F/H Kit electronic parts ONLY (Check availability before ordering). Price £30 + £2 P&P (UK & EEC). Rest of the World customers add £0.50 postal option below.
Supplement for building/ tuning any of the above boards. Price £23.
1off Micrometal T650-52 toroidal core. Price £49.50 + £14 P&P.(For postage outside UK contact us)
16 & 20AWG silver plated, solid copper cored Teflon coated wire available. Price currently £65.50 + £4.50 (UK). (For postage outside the UK please contact us)
1off set of 101plates 6 x 6" x 1.5mm 316 grade stainless steel plates to fit an Ed Holdgate acrylic box. The original requirement for 16AWG gauge steel has now been superceded.- Price £650 inclusive of postage within the UK. EC customers please contact us for shipping costs.
For information concerning a Bob Boyce acrylic box please check out Ed Holdgate's Boyce Electrolyzer Tank.
1off 470uf/ 400V capacitor - £9.75 + £1.50 P&P (UK/ EC).
1off 800V/ 15A FWBR - £2.50 + £1.50 P&P (UK/ EC).
500gms natural beeswax for sealing coils/ turns on the toroid. £5.75 + £3.00 P&P (UK/ EC).
IP802YE tape for winding toroid. £5.75 + £2.00 P&P (UK/ EC).
One Micrometal T157-45 toroid core for making the chokes specified in a Bob Boyce system. £4.00 + £1.50 P&P. (UK/ EC) US and Rest of World customers please add the £0.50 postal option below.
One Bob Boyce heavty duty choke kit consisting of 3off Micrometal T157-45 cores c/w sufficient 18SWG ECW. £10+ £3P&P. (UK/ EC) US and Rest of World customers please add 3 lots of £0.50 postal option below i.e. total £1.50.
Complete toroid kit consisting of a toroid, wire, beeswax and tape as per D9.pdf. Price at 6th December 2009 is £127.50 + £18.00 (P&P (UK only) (please confirm before ordering).
Rest of the World Postal option. Price £0.50.
Dave Lawton/ Scott Cramton Pattern Electrolyser
Bare PCB for Dave Lawton PWM. Price £5 + £1.00 P&P (UK/ EC). Customers in the Rest of the World please add the £0.50 postal supplement above.
Kit of parts to build a complete boxed Dave Lawton electronics unit. Price £40 + £5 P&P (UK/ EC). Customers in the Rest of the World please add the £7 postal supplement below.
Fully built and tested in a case, Dave Lawton 'approved' pattern electronics system. Sold under 'licence' from Dave Lawton with a percentage of each sale going back to him for further research. Price £75 + £5 P&P (UK/ EC). Customers in the Rest of the World please add the £7 postal supplement below.
Rest of the World Postal Supplement for complete DL kits and built units. Price £7.00.
110mm wide x 33cm long 3mm walled acrylic tube. Price £7.00 each + £4 P&P.(UK/EC)
110mm wide screwed end cap. 2off required. Price 21.00 each, thus £42.00 a pair + £4 P&P.
110mm wide acrylic pipe c/w screwed end caps. Price 49.00 each + £10 P&P.
150mm wide x 3mm thick x 50cm long acrylic tube. This size ideal for tubes 1ft long. Price £17.00 + £6.00 P&P.
150mm wide x 3mm thick x 75cm long acrylic tube. This size ideal for 18" long tubes. Price £23.50 + £12.50 P&P.
2off 1.5mm thick neoprene circular gaskets to seal a 150mm diamteret acrylic tube. Price £4.50 + £2.50 P&P.
2off 250 x 250mm x 20mm HDPE 'end caps' for a 150mm diameter electrolyser.< Price £20 + £10 P&P./td>
Kit of parts to complete a 150mm electrolyser consisting of a 150mm x 750mm acrylic tube, 2off 250 x 250 x 20mm HDPE (as endcaps), 2off gaskets, 4off 10mm x 1mtr stainless steel stud bar c/w nuts and washers. Price circa £70.50 + postage.
1off brand new 18ACR alternator for conversion to a Stan Meyer unregulated output device. Price £52 + £11.50 P&P.
1off pair 1" OD and 3/4" OD 316L grade 16SWG seamless stainless steel tubes 6" long. (We can drill and tap these tubes to take 4mm bolts although we will charge extra for this service - please ask). Price £11.60 + £2.50 P&P.
1off pair 1" OD and 3/4" OD 316L grade 16SWG seamless stainless steel tubes 12" long. (We can drill and tap these tubes to take 4mm bolts although we will charge extra for this service - please ask). Price £19.50 + £3.50 P&P.
1off pair 3/4" OD and 1/2" OD 316L grade 16SWG seamless stainless steel tubes 18" long. Price £26 + £6 P&P
27off 4 mm x 16mm plastic bolts to hold tubes in the Scott Cramton pattern cell. Price £1.75 + £1 P&P.
One 110mm diameter tube mounting plate ready drilled to take 6 pairs of stainless concentric tubes. £7.50 + £2.00 P&P.
One stainless steel fixings kit consisting of 12off 8mm x 4mm, 2off 25mm x 4mm bolts c/w plain and shakeproof washers + suitable stainless wire. £10 + £1.00 P&P.
One 10mm x 100mm ferrite rod c/w enough 21SWG ECW to make one inductor as per D14.pdf. £6.00 + £1.50 P&P. (UK/ EC) US and Rest of World customers please contact us for your actual postal costs.
EFIE
One prototype EFIE kit c/w box as per Patrick Kelly's D17.pdf. £TBA (UK/ EC) US and Rest of World customers please contact us for your actual postal costs.
Hydrogen Booster
1off Hydrogen Booster c/w bubbler (as per picture on our Home page). £99.99 + £12 P&P.
500gms of Potassium Hydroxide. £10.75 + £2.50 P&P.
Bedini Project Parts
10off 1 7/8 x 7/8 x 3/8" pure barium ferrite magnet to suit an accurate replication of a Bedini-Kromrey Converter. These have been especially commissioned and are not a barium/ strontium mix and we believe these magnets to be identical to those used by John Bedini in the original devices. The price quoted is for the 10 items - please enquire for postage costs for a bulk order or for sales outwith the UK. £13.50 + £3.50 P&P.
4off MJL21194 (genuine source). £10 + £1 P&P.
5off insulating washers for MJL21194. £1.00 + £0.50 P&P.
5off BD243C. £1.50 + £1 P&P.
2off 2N3440. £1.00 + £1 P&P.
10off 1N5626 (low DCR device recommended by John Bedini previously). £3.00 + £1 P&P.
2off H11D1 Opto-isolator. £1.00 + £1 P&P.
10off 1N5408. £1.00 + £1 P&P.
1off SG3524N. £1.00 + £1 P&P.
10off 1N4001 and 10off 1N4007. £1.00 + £1 P&P.
12off Grade 8 ceramic magnets 1 7/8 x 3/4 x 1/4". £5.00 + £2.50 P&P
1off 1k 2W rated 10 turn potentiometer. It may seem expensive but a 1/4W carbon device won't last very long and this one won't melt either!!£9.00 + £1.00 P&P
1off complete kit of parts to build the Fig.33/ p.46 charger from the Bearden/ Bedini Free Energy book including a custom made PCB, all electronic parts and a pre-wound 23AWG 450 trifilar turn coil!! NOT CURRENTLY AVAILABLE. Note we are unable to supply a circuit diagram due to copyright infringement. EC/ US and Rest of World customers please use postal supplements immediately below.
EC Bedini Kit Postal Supplement. Price £1.50.
Rest of the World Bedini Kit Postal option. Price £4.00.
1off PCB based on the Fig.33/ p.46 circuit in the Bedini/ Bearden 'Free Energy' book!! This version is designed to take a MJL21194 in place of the BD243C and a 2N3584 in place of the 2N3440. We refer to this as 'Big Boy' radiant charger PCB. Price NOT CURRENTLY AVAILABLE

Any queries with regard to multiple orders, combinations not covered above and post to other parts of the world please send us an email and we will deal with your enquiry directly. Discounts on individual item prices and savings on postage are available on the above advertised prices for orders of more than one product.

With regards to Bedini Project parts we can provide all that is required to get a beginner 'off the ground'. We have neon lamps, resistors, pots, lamp holders even copper wire. Be aware that the pot we supply appears expensive but is a genuine quality 2W rated device. So if you need a box of bits then contact us for a quote and save on postage. We're here to help.

Orders can also be placed by snail mail to:

Courtiestown Marine Limited
Courtiestown Farmhouse
Leslie-by-Insch
HUNTLY
Aberdeenshire
AB54 4PN

Please make cheques payable to Courtiestown Marine Limited